Smart Li-Ion 14S 40A H-Series Programmable BMS Module, BT,WiFi

H-series BMS module for protection against short circuit, overcharge, excessive discharge and the function of equalizing the voltages of individual cells.

The H-Series BMS DALY is the smallest SMART BMS (40-60A) available on the market. Compared to their predecessors, the balancing current has been increased to 100mA, the power consumption for the BMS’s own needs has been reduced, a switch has been added, and WiFi support has been added. Their miniature dimensions allow them to be installed in bicycles, scooters and wherever space is limited.

All DALY BMS (except the 100Balance series) are manufactured for a specific type of cells (Li-Ion, LiFePO4, LTO) and number of cells. It is not possible for the user to change these parameters.

Wide communication capabilities of the BMS (BT mobile app, WiFi, RS485, CAN, screens, and indicators) allow for monitoring battery parameters and adjusting them to specialized needs.

Thanks to the patented injected mixture sealing technology, DALY BMS are highly resistant to water, vibration and dust.

NOTE: DALY BMS of the H, K, M, S, 100Balance series don’t support communication with inverters. Their cooperation with the inverter is possible only based on the charging and discharging parameters manually set on the inverter. If it is necessary to establish CAN/RS485 communication, use the HES series DALY BMS, or traditional DALY SMART CAN/RS485 BMS with an additional COMBOARD.

Common power port (P-) – it is not required to run a separate cable from the charger. Charging and discharging occur through the same wire.

Before starting the BMS, it must be connected to the pack strictly according to the attached instructions.

The BMS set includes temperature probes (1 or 2 depending on the model), BT module and switch.

Other accessories are not included in the set and can be purchased separately:

• Voltage indicator for BMS Daly H, K, M, S, 100Balance
• 3″ LCD Voltage indicator for BMS SMART Daly H, K, M, S, 100Balance
• 4,3″ LCD touch screen for BMS Daly H, K, M, S, 100Balance
• WiFi BMS H,K,M,S, Daly module
• RS485 cable for BMS DALY H, K, M, S, 100Balance
• 1A and 5A active balancers

NOTE: Despite the significant reduction in power consumption in the new BMS SMART series, there is a risk of battery discharge during prolonged storage. Such self-discharge is not monitored or controlled by the BMS. This can lead to cell damage, particularly in packs with lower capacity or those that were heavily discharged prior to storage. During long-term storage, periodic monitoring of the battery voltage and, if necessary, recharging is required.

To program and monitor parameters, it is necessary to download the application. Android & iOS version available.