BMS Smart LiFePO4 Module 16S 200A M-Series Programmable with Bluetooth and WiFi

Programmable BMS module for LiFePO4 packages

BMS SMART H, K, M, S connection and use manual

Principles of selecting a BMS for a battery pack

• M-series BMS module for protection against short circuit, overcharge, excessive discharge and the function of equalizing the voltages of individual cells.
• The M-Series BMS DALY is a new series of more powerful BMS (150-200A) with improved parameters. Compared to their predecessors, the balancing current has been increased to 100mA, the power consumption for the BMS’s own needs has been reduced, a switch, the ability to support WiFi, and a second UART port have been added. The external dimensions were also reduced.
• All DALY BMS (except the 100 Active series) are manufactured for a specific type of cell (Li-Ion, LiFePO4, LTO) and number of cells. It is not possible for the user to change these parameters.
• Broad BMS communication capabilities (BT mobile application, WiFi, RS485, CAN, screens and indicators) allow you to monitor battery parameters and adapt them to specialized needs.
• Thanks to the patented injected mixture sealing technology, DALY BMS are highly resistant to water, vibration and dust.
• M Series BMS enable parallel connection of packages equipped with them, without additional parallel modules that are required in traditional SMART DALY BMS.
• NOTE: DALY BMS of the H, K, M, S, 100Balance series don’t support communication with inverters. Their cooperation with the inverter is possible only based on the charging and discharging parameters manually set on the inverter. If it is necessary to establish CAN/RS485 communication, use the HES series DALY BMS, or traditional DALY SMART CAN/RS485 BMS with an additional COMBOARD board.
• Common power port (P-) – no separate cable from the charger is required. a Charging and discharging take place over the same cable.
• Before starting the BMS, connect it to the package, strictly in accordance with the attached instructions.
• Before starting the BMS, connect it to the package, strictly in accordance with the instructions provided with the BMS. The set includes temperature probes (1 or 2 depending on the model), BT module and a switch.
• Other accessories are not included in the set and can be purchased separately:
• Voltage indicator for BMS Daly H, K, M, S, 100Balance
• 3″ LCD voltage indicator for BMS SMART Daly H, K, M, S, 100Balance
• 4,3″ LCD touch screen for BMS Daly H, K, M, S, 100Balance
• WiFi module for BMS H, K, M, S, 100Balance
• RS485 cable for BMS DALY H, K, M, S, 100Balance
• 1A and 5A active balancers
• NOTE: Despite the significant reduction in power consumption in the new BMS SMART series, there is a risk of battery discharge during long storage. This self-discharge is not monitored and controlled by the BMS. This may result in damage to cells, especially for packs with lower capacity or heavily discharged before storage. In case of long-term storage, it is necessary to periodically check the battery voltage and, if necessary, recharge it.
• To program and monitor parameters, it is necessary to download the app. iOS and Android app available.