Smart Li-Ion 16S 100A K-Series Programmable BMS Module, BT,WiFi

Smart Li-Ion 16S 100A K-Series Programmable BMS Module, BT,WiFi - Image 2

Smart Li-Ion 16S 100A K-Series Programmable BMS Module, BT,WiFi - Image 3

Smart Li-Ion 16S 100A K-Series Programmable BMS Module, BT,WiFi - Image 4

Smart Li-Ion 16S 100A K-Series Programmable BMS Module, BT,WiFi - Image 5

Smart Li-Ion 16S 100A K-Series Programmable BMS Module, BT,WiFi - Image 6

Smart Li-Ion 16S 100A K-Series Programmable BMS Module, BT,WiFi

Name: Smart Li-Ion 16S 100A K-Series Programmable BMS Module, BT,WiFi
SKU: ID00359
Availability: InStock

€81,57

Only 2 left in stock (can be backordered)

Programmable BMS module for LiIon packs. Manual fir BMS SMART H, K, M, S. Rules for selecting a BMS for a battery pack.

ADDITIONAL INFORMATION

K-series BMS module for protection against short circuit, overcharge, excessive discharge and the function of equalizing the voltages of individual cells.
The K-series BMS DALY is a new series of medium-sized BMS (40-100A) with improved parameters. Compared to their predecessors, the balancing current has been increased to 100mA, the power consumption for the BMS’s own needs has been reduced, a switch, the ability to support WiFi, and a second UART port have been added. The external dimensions were also reduced.
All DALY BMS (except the 100 Active series) are manufactured for a specific type of cell (Li-Ion, LiFePO4, LTO) and number of cells. It is not possible for the user to change these parameters.
Broad BMS communication capabilities (BT mobile application, WiFi, RS485, CAN, screens and indicators) allow you to monitor battery parameters and adapt them to specialized needs.
Thanks to the patented injected mixture sealing technology, DALY BMS are highly resistant to water, vibration and dust.
K Series BMS enable parallel connection of packages equipped with them, without additional parallel modules that are required in traditional SMART DALY BMS.
NOTE: DALY BMS of the H, K, M, S, 100Balance series don’t support communication with inverters. Their cooperation with the inverter is possible only based on the charging and discharging parameters manually set on the inverter. If it is necessary to establish CAN/RS485 communication, use the HES series DALY BMS, or traditional DALY SMART CAN/RS485 BMS with an additional COMBOARD.
Common power port (P-) – no separate cable from the charger is required. Charging and discharging take place over the same cable.
Before starting the BMS, connect it to the package, strictly in accordance with the attached instructions.
The BMS set includes temperature probes (1 or 2 depending on the model), BT module and switch.
Other accessories are not included in the set and can be purchased separately:
Voltage indicator for BMS Daly H, K, M, S, 100Balance
3″ LCD Voltage indicator for BMS SMART Daly H, K, M, S, 100Balance
4,3″ LCD touch screen for BMS Daly H, K, M, S, 100Balance
WiFi Module for BMS H, K, M, S, 100Balance
RS485 cable for BMS DALY H, K, M, S, 100Balance
1A and 5A active balancers
NOTE: Despite the significant reduction in power consumption in the new BMS SMART series, there is a risk of battery discharge during long storage. This self-discharge is not monitored and controlled by the BMS. This may result in damage to cells, especially for packs with lower capacity or heavily discharged before storage. In case of long-term storage, it is necessary to periodically check the battery voltage and, if necessary, recharge it.
To program and monitor parameters, it is necessary to download the app. iOS and Android app available.

Karta produktu

Additional information

Battery voltage	57,6V 16S
Maximum continuous discharge current	100A
Brand	DALY
Cell type	lithium-ion (Li-Ion)
Maximum charging voltage	67,2V
Outlets	Wire 2×10,5mm2 (2x7AWG)
Maximum charging current	50A
Power consumption	<15mA work, <550µA standby
Cell balancing current	100mA